The header of the FITS file is listed below,
followed by a sample of values (limited to 1000 lines).
#--- sp/PLup3_4N.fit
#ext xtension bpx (dim) x2880 extname
#-------------------------------------------------------------------------------
#000 main -32 (24750) 57b [LINEAR=994.02/2478.96(0.06)]
#-------------------------------------------------------------------------------
SIMPLE = T / Standard FITS format: NOST 100-2.0
BITPIX = -32 / No. of bits per pixel
NAXIS = 1 / No. of axes in image
NAXIS1 = 24750 / No. of pixels
EXTEND = T / FITS extension may be present
BLOCKED = T / FITS file may be blocked
COMMENT NOST 100-2.0: Hanisch,R. et al. 2001, Astron. & Astrophys. 376, 559
.
CRPIX1 = 1. / Reference pixel
CRVAL1 = 994.02 / Coordinate at reference pixel
CDELT1 = 0.06 / Coord. incr. per pixel (original value)
CTYPE1 = 'LINEAR ' / Units of coordinate
BUNIT = ' ' / Units of data values
DATAMAX = 6.37464036499E-15 / Maximum data value
DATAMIN = 1.17549435082E-38 / Minimum data value
.
ORIGIN = 'ESO-MIDAS' / Written by MIDAS
DATE = '2012-04-13T13:23:08' / [UTC] Date of writing
FILENAME= 'flux_Par_Lup3_4_noding_corr_phot.fits' / Original file base-name
MIDASFTP= 'IMAGE ' / MIDAS File Type
.
OBJECT = 'Par-Lup3-4' / MIDAS desc.: IDENT(1)
RA = 242.215225 / MIDAS desc.: O_POS(1)
DEC = -39.09205 / MIDAS desc.: O_POS(2)
EQUINOX = 2000. / MIDAS desc.: O_POS(3)
DATE-OBS= '2010-04-07' / MIDAS desc.: O_TIME(1)
MJD-OBS = 55293.17628237 / MIDAS desc.: O_TIME(4)
TM-START= 15230.79676777 / MIDAS desc.: O_TIME(5)
EXPTIME = 900. / MIDAS desc.: O_TIME(7)
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astron
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..35
COMMENT ITS (Flexible Image Transport System) format is defined in 'Astro
COMMENT nd Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..3
COMMENT TS (Flexible Image Transport System) format is defined in 'Astr
COMMENT d Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..
COMMENT S (Flexible Image Transport System) format is defined in 'Ast
COMMENT Astrophysics', volume 376, page 359; bibcode: 2001A&A...376.
COMMENT (Flexible Image Transport System) format is defined in 'As
COMMENT strophysics', volume 376, page 359; bibcode: 2001A&A...376
COMMENT Flexible Image Transport System) format is defined in 'A
COMMENT trophysics', volume 376, page 359; bibcode: 2001A&A...37
COMMENT lexible Image Transport System) format is defined in '
COMMENT rophysics', volume 376, page 359; bibcode: 2001A&A...3
COMMENT exible Image Transport System) format is defined in
COMMENT ophysics', volume 376, page 359; bibcode: 2001A&A...
COMMENT xible Image Transport System) format is defined i
COMMENT physics', volume 376, page 359; bibcode: 2001A&A..
COMMENT ible Image Transport System) format is defined
COMMENT hysics', volume 376, page 359; bibcode: 2001A&A.
COMMENT ble Image Transport System) format is define
COMMENT ysics', volume 376, page 359; bibcode: 2001A&A
COMMENT le Image Transport System) format is defin
COMMENT sics', volume 376, page 359; bibcode: 2001A&
COMMENT e Image Transport System) format is defi
COMMENT ics', volume 376, page 359; bibcode: 2001A
COMMENT Image Transport System) format is def
COMMENT cs', volume 376, page 359; bibcode: 2001
COMMENT mage Transport System) format is de
COMMENT s', volume 376, page 359; bibcode: 200
COMMENT age Transport System) format is d
COMMENT ', volume 376, page 359; bibcode: 20
TELESCOP= 'ESO-VLT-U2' / MIDAS desc.: TELESCOP(1)
INSTRUME= 'XSHOOTER' / MIDAS desc.: INSTRUME(1)
RADECSYS= 'FK5 ' / MIDAS desc.: RADECSYS(1)
OBSERVER= 'UNKNOWN ' / MIDAS desc.: OBSERVER(1)
IRAF-TLM= '2012-04-13T13:22:39' / Time of last modification
UTC = 15228. / 04:13:48.000 UTC at start (sec)
LST = 45211.874 / 12:33:31.874 LST at start (sec)
PI-COI = 'UNKNOWN ' / PI-COI name.
CHECKSUM= 'araSdoWQaoaQaoUQ' / HDU checksum updated 2010-04-07T04:28:57
DATASUM = '35849458' / data unit checksum updated 2010-04-07T04:28:57
DATAMD5 = '9361b3ab229dffee553757ee11d984a6' / MD5 checksum
PIPEFILE= 'SCI_SLIT_FLUX_MERGE1D_NIR.fits' / Filename of data product
APNUM1 = '1 1 '
DC-FLAG = 0
WCSDIM = 1
CD1_1 = 0.06
LTM1_1 = 1.
WAT0_001= 'system=equispec'
WAT1_002= 's '
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.11' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 4833 / Expected execution time
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS ID = 200201154 / Observation block ID
HIERARCH ESO OBS NAME = 'Par-Lup3-4' / OB name
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS PI-COI ID = 70606 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PROG ID = '085.C-0238(A)' / ESO program identification
HIERARCH ESO OBS START = '2010-04-07T04:07:31' / OB start time
HIERARCH ESO OBS TARG NAME = 'Par-Lup3-4' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 4 / Exposure number within template
HIERARCH ESO TPL ID = 'XSHOOTER_slt_obs_AutoNodOnSlit' / Template signa
HIERARCH ESO TPL NAME = 'XSHOOTER observations with AutoNodOnSlit offset'
HIERARCH ESO TPL NEXP = 13 / Number of exposures within templat
HIERARCH ESO TPL PRESEQ= 'XSHOOTER_obs_AutoNodOnSlit.seq' / Sequencer scri
HIERARCH ESO TPL START = '2010-04-07T04:13:07' / TPL start time
HIERARCH ESO TPL VERSION = '$Revision: 1.71 $' / Version of the template
HIERARCH ESO TEL AIRM END = 1.399 / Airmass at end
HIERARCH ESO TEL AIRM START = 1.474 / Airmass at start
HIERARCH ESO TEL ALT = 42.646 / Alt angle at start (deg)
HIERARCH ESO TEL AMBI FWHM END = 0.71 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI FWHM START = 0.9 / Observatory Seeing queried
HIERARCH ESO TEL AMBI PRES END = 744.88 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI PRES START = 744.93 / Observatory ambient air pr
HIERARCH ESO TEL AMBI RHUM = 14. / Observatory ambient relative humi
HIERARCH ESO TEL AMBI TAU0 = 0.015699 / Average coherence time
HIERARCH ESO TEL AMBI TEMP = 17.27 / Observatory ambient temperature qu
HIERARCH ESO TEL AMBI WINDDIR = 312. / Observatory ambient wind directio
HIERARCH ESO TEL AMBI WINDSP = 2.92 / Observatory ambient wind speed que
HIERARCH ESO TEL AZ = 301.427 / Az angle at start (deg) S=0,W=90
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL DATE = '2000-01-01T00:00:00' / TCS installation date
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 108.557 / Focal length (m)
HIERARCH ESO TEL FOCU SCALE = 1.894 / Focal scale (arcsec/mm)
HIERARCH ESO TEL FOCU VALUE = 0.191 / M2 setting (mm)
HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT= -24.6272 / Tel geo latitute (+=North) (deg)
HIERARCH ESO TEL GEOLON= -70.4048 / Tel geo longitude (+=East) (deg)
HIERARCH ESO TEL ID = 'v 3.29+ ' / TCS version number
HIERARCH ESO TEL MOON DEC = -19.76005 / -19:45:36.1 DEC (J2000) (deg)
HIERARCH ESO TEL MOON RA = 298.370257 / 19:53:28.8 RA (J2000) (deg)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL PARANG END = -86.419 / Parallactic angle at end (deg)
HIERARCH ESO TEL PARANG START = -88.922 / Parallactic angle at start (deg)
HIERARCH ESO TEL TARG ALPHA = 160851.43 / Alpha coordinate for the target
HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type (M=mean A=apparen
HIERARCH ESO TEL TARG DELTA = -390530.4 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000. / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM = 'J ' / Epoch system (default J=Ju
HIERARCH ESO TEL TARG EQUINOX = 2000. / Equinox
HIERARCH ESO TEL TARG PARALLAX = 0. / Parallax
HIERARCH ESO TEL TARG PMA = 0. / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0. / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0. / Radial velocity
HIERARCH ESO TEL TH M1 TEMP = 15.5 / M1 superficial temperature
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO INS ADC1 DEC = -390710.34418 / Telescope desclination [deg].
HIERARCH ESO INS ADC1 END = 5.312 / Position angle at end [deg].
HIERARCH ESO INS ADC1 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC1 RA = 160935.442381 / Telescope right ascension [deg]
HIERARCH ESO INS ADC2 DEC = -390710.34418 / Telescope desclination [deg].
HIERARCH ESO INS ADC2 END = 74.8948 / Position angle at end [deg].
HIERARCH ESO INS ADC2 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC2 RA = 160935.442381 / Telescope right ascension [deg]
HIERARCH ESO INS ADC3 DEC = -390710.34418 / Telescope desclination [deg].
HIERARCH ESO INS ADC3 END = 3.851 / Position angle at end [deg].
HIERARCH ESO INS ADC3 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC3 RA = 160935.442381 / Telescope right ascension [deg]
HIERARCH ESO INS ADC4 DEC = -390710.34418 / Telescope desclination [deg].
HIERARCH ESO INS ADC4 END = 64.9727 / Position angle at end [deg].
HIERARCH ESO INS ADC4 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC4 RA = 160935.442381 / Telescope right ascension [deg]
HIERARCH ESO INS DATE = '2005-04-01' / Instrument release date (yyyy-mm-d
HIERARCH ESO INS DID = 'ESO-VLT-DIC.XSHOOTER_ICS-0.78' / Data dictionary
HIERARCH ESO INS FILT1 ID = 'PS11 ' / Filter unique id.
HIERARCH ESO INS FILT1 NAME = 'I ' / Filter name.
HIERARCH ESO INS FILT1 NO = 11 / Filter wheel position index.
HIERARCH ESO INS FOCU1 ENC = 27218 / Absolute position [Enc].
HIERARCH ESO INS FOCU1 POS = 16.9 / Position [C].
HIERARCH ESO INS FOCU2 ENC = 11750 / Absolute position [Enc].
HIERARCH ESO INS FOCU2 POS = 0. / Position [C].
HIERARCH ESO INS ID = 'XSHOOTER/1.57' / Instrument ID.
HIERARCH ESO INS MIRR1 ID = 'Tel ' / Mirror unique ID.
HIERARCH ESO INS MIRR1 NAME = 'Tel ' / Mirror name.
HIERARCH ESO INS MIRR1 NO = 1 / Mirror slide position.
HIERARCH ESO INS MODE = 'SLITSPEC' / Instrument mode used.
HIERARCH ESO INS OPTI2 ID = 'SLOT ' / OPTIi unique ID.
HIERARCH ESO INS OPTI2 NAME = 'SLOT ' / OPTIi name.
HIERARCH ESO INS OPTI2 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI2 TYPE = 'MIRROR ' / OPTIi element.
HIERARCH ESO INS OPTI3 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI3 NAME = '1.0x11 ' / OPTIi name.
HIERARCH ESO INS OPTI3 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI3 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI4 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI4 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI4 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI4 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI5 ID = 'PS3 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI5 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI5 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI5 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS PATH = 'SLITSPEC' / Optical path used.
HIERARCH ESO INS SENS21 ID = 'CA1F1 ' / sensor ID.
HIERARCH ESO INS SENS21 NAME = 'Cab.1 Flow rate' / sensor common name.
HIERARCH ESO INS SENS21 VAL = 91. / Cab. 1 Flow rate [l/h]
HIERARCH ESO INS SENS60 ID = 'NPM ' / sensor ID.
HIERARCH ESO INS SENS60 NAME = 'NIR cryo. P' / sensor common name.
HIERARCH ESO INS SENS60 VAL = 2.81E-06 / NIR Pressure [mbar]
HIERARCH ESO INS SENS81 ID = 'RANGE ' / sensor ID.
HIERARCH ESO INS SENS81 NAME = 'Heater Range' / sensor common name.
HIERARCH ESO INS SENS81 VAL = 9999. / Lake 340 Heater Range
HIERARCH ESO INS SENS82 ID = 'HEATR ' / sensor ID.
HIERARCH ESO INS SENS82 NAME = 'Heater output' / sensor common name.
HIERARCH ESO INS SENS82 VAL = 9999. / Lake 340 Heater output
HIERARCH ESO INS SENSOR7 SWSIM = T / If T, function is software simulat
HIERARCH ESO INS SHUT1 ID = 'INSH ' / Shutter ID.
HIERARCH ESO INS SHUT1 NAME = 'Instrument shutter' / Shutter name.
HIERARCH ESO INS SHUT1 ST = T / Shutter open.
HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation.
HIERARCH ESO INS TEMP1 ID = 'TMUC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP1 NAME = 'UVB Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP1 VAL = 16.95 / UVB Camera temp. [C]
HIERARCH ESO INS TEMP10 ID = 'TMA ' / Temperature sensor ID.
HIERARCH ESO INS TEMP10 NAME = 'Ambient temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP10 VAL = 17.51 / Ambient temp. [C]
HIERARCH ESO INS TEMP11 ID = 'TMADC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP11 NAME = 'BB UVB ADC temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP11 VAL = 18.19 / BB UVB ADC temp. [C]
HIERARCH ESO INS TEMP2 ID = 'TMUP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP2 NAME = 'UVB Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP2 VAL = 16.48 / UVB Prism temp. [C]
HIERARCH ESO INS TEMP21 ID = 'CA1OT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP21 NAME = 'Cab.1 outlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP21 VAL = 13.67 / Cab. 1 outlet temp. [C]
HIERARCH ESO INS TEMP22 ID = 'CA1IT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP22 NAME = 'Cab.1 inlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP22 VAL = 10.93 / Cab. 1 inlet temp. [C]
HIERARCH ESO INS TEMP23 ID = 'CA1CT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP23 NAME = 'Cab.1 temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP23 VAL = 20.54 / Cab. 1 temp. [C]
HIERARCH ESO INS TEMP24 ID = 'CA1AT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP24 NAME = 'Cab.1 Amb. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP24 VAL = 18.22 / Cab. 1 Amb. temp. [C]
HIERARCH ESO INS TEMP3 ID = 'TMUB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP3 NAME = 'UVB bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP3 VAL = 17.08 / UVB bench temp. [C]
HIERARCH ESO INS TEMP4 ID = 'TMVC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP4 NAME = 'VIS Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP4 VAL = 15.93 / VIS Camera temp. [C]
HIERARCH ESO INS TEMP5 ID = 'TMVP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP5 NAME = 'VIS Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP5 VAL = 16.22 / VIS Prism temp. [C]
HIERARCH ESO INS TEMP6 ID = 'TMVB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP6 NAME = 'VIS bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP6 VAL = 16.57 / VIS bench temp. [C]
HIERARCH ESO INS TEMP7 ID = 'TMUCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP7 NAME = 'UVB cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP7 VAL = 15.67 / UVB cryo. temp. [C]
HIERARCH ESO INS TEMP8 ID = 'TMVCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP8 NAME = 'VIS cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP8 VAL = 14.68 / VIS cryo. temp. [C]
HIERARCH ESO INS TEMP80 ID = 'OBCT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP80 NAME = 'OB Cover Tel.' / Temperature sensor name.
HIERARCH ESO INS TEMP80 VAL = 104.13 / OB Cover Telescope [K]
HIERARCH ESO INS TEMP81 ID = 'OBCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP81 NAME = 'OB Cover Tank' / Temperature sensor name.
HIERARCH ESO INS TEMP81 VAL = 104.25 / OB Cover Tank [K]
HIERARCH ESO INS TEMP82 ID = 'OBPR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP82 NAME = 'OB Prism1' / Temperature sensor name.
HIERARCH ESO INS TEMP82 VAL = 103.33 / OB Prism1 [K]
HIERARCH ESO INS TEMP83 ID = 'OBCL ' / Temperature sensor ID.
HIERARCH ESO INS TEMP83 NAME = 'OB Corrector Lens' / Temperature sensor name.
HIERARCH ESO INS TEMP83 VAL = 104.35 / OB Corrector Lens [K]
HIERARCH ESO INS TEMP84 ID = 'CP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP84 NAME = 'Cryo. Cold Plate' / Temperature sensor name.
HIERARCH ESO INS TEMP84 VAL = 82.945 / Cryostat Cold Plate [K]
HIERARCH ESO INS TEMP85 ID = 'RS ' / Temperature sensor ID.
HIERARCH ESO INS TEMP85 NAME = 'Cryo. rad. shield' / Temperature sensor name.
HIERARCH ESO INS TEMP85 VAL = 94.538 / Cryostat rad. shield [K]
HIERARCH ESO INS TEMP86 ID = 'DCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP86 NAME = 'CCD Copper bar' / Temperature sensor name.
HIERARCH ESO INS TEMP86 VAL = 76.657 / CCD Copper bar [K]
HIERARCH ESO INS TEMP9 ID = 'TMNCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP9 NAME = 'NIR cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP9 VAL = 18.06 / NIR cryo. temp. [C]
HIERARCH ESO INS TEMP90 ID = 'NHT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP90 NAME = 'NIR Head temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP90 VAL = 9999. / NIR Head temp. [K]
HIERARCH ESO INS TILT1 AFCX = 0.102 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT1 AFCY = -0.021 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT1 CONVX = 0.208 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT1 CONVY = 0.269 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT1 ENGX = 6.234 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT1 ENGY = 6.162 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT1 ID = 'afcs1 ' / AFCS ID.
HIERARCH ESO INS TILT1 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT1 NAME = 'Flexure comp. UVB' / AFCS description.
HIERARCH ESO INS TILT1 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT1 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT1 POSXEND = 1.227 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSXSTART = 1.421 / Piezo position at start in
HIERARCH ESO INS TILT1 POSYEND = 1.153 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSYSTART = 1.236 / Piezo position at start in
HIERARCH ESO INS TILT1 REFRACXEND = 1.609 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT1 REFRACXST = 1.637 / Atm. refr. corr. start in
HIERARCH ESO INS TILT1 REFRACYEND = 1.658 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT1 REFRACYST = 1.669 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 AFCX = -0.226 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT2 AFCY = 0.338 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT2 CONVX = 0.291 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT2 CONVY = 0.384 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT2 ENGX = 3.861 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT2 ENGY = 4.315 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT2 ID = 'afcs2 ' / AFCS ID.
HIERARCH ESO INS TILT2 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT2 NAME = 'Flexure comp. VIS' / AFCS description.
HIERARCH ESO INS TILT2 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT2 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT2 POSXEND = -1.145 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSXSTART = -1.302 / Piezo position at start in
HIERARCH ESO INS TILT2 POSYEND = -0.691 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSYSTART = -0.764 / Piezo position at start in
HIERARCH ESO INS TILT2 REFRACXEND = -1.646 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT2 REFRACXST = -1.672 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 REFRACYEND = -1.698 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT2 REFRACYST = -1.712 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 AFCX = 0.325 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT3 AFCY = 0.396 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT3 CONVX = 0.58 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT3 CONVY = 0.56 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT3 ENGX = 4.043 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT3 ENGY = 6.407 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT3 ID = 'afcs3 ' / AFCS ID.
HIERARCH ESO INS TILT3 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT3 NAME = 'Flexure comp. NIR' / AFCS description.
HIERARCH ESO INS TILT3 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT3 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT3 POSXEND = -0.966 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSXSTART = -1.057 / Piezo position at start in
HIERARCH ESO INS TILT3 POSYEND = 1.391 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSYSTART = 1.562 / Piezo position at start in
HIERARCH ESO INS TILT3 REFRACXEND = -1.765 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT3 REFRACXST = -1.789 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 REFRACYEND = -1.814 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT3 REFRACYST = -1.827 / Atm. refr. corr. start in
HIERARCH ESO DET CHIP ID = 'ESO-Hawaii2RG' / Detector ID
HIERARCH ESO DET CHIP NAME = 'Hawaii2RG' / Detector name
HIERARCH ESO DET CHIP NX = 2048 / Pixels in X
HIERARCH ESO DET CHIP NY = 1100 / Pixels in Y
HIERARCH ESO DET CHIP PXSPACE = 1.8E-05 / Pixel-Pixel Spacing
HIERARCH ESO DET CHIP TYPE = 'IR ' / The Type of Det Chip
HIERARCH ESO DET CHOP FREQ = 0 / Chopping Frequency
HIERARCH ESO DET CON OPMODE = 'NORMAL ' / Operational Mode
HIERARCH ESO DET DID = 'ESO-VLT-DIC.IRACE-1.44' / Dictionary Name and Re
HIERARCH ESO DET DIT = 900. / Integration Time
HIERARCH ESO DET DITDELAY = 0. / Pause Between DITs
HIERARCH ESO DET EXP NAME = 'XSHOOTER_SLT_OBJ_NIR_097_0017' / Exposure Name
HIERARCH ESO DET EXP NO= 1220 / Exposure number
HIERARCH ESO DET EXP UTC = '2010-04-07T04:28:55.0755' / File Creation Time
HIERARCH ESO DET FILE CUBE ST = F / Data Cube On/Off
HIERARCH ESO DET FRAM NO = 1 / Frame number
HIERARCH ESO DET FRAM TYPE = 'INT ' / Frame type
HIERARCH ESO DET FRAM UTC = '2010-04-07T04:28:53.6245' / Time Recv Frame
HIERARCH ESO DET IRACE ADC1 DELAY = 7 / ADC Delay Adjustment
HIERARCH ESO DET IRACE ADC1 ENABLE = 1 / Enable ADC Board (0/1)
HIERARCH ESO DET IRACE ADC1 FILTER1 = 0 / ADC Filter1 Adjustment
HIERARCH ESO DET IRACE ADC1 FILTER2 = 0 / ADC Filter2 Adjustment
HIERARCH ESO DET IRACE ADC1 HEADER = 1 / Header of ADC Board
HIERARCH ESO DET IRACE ADC1 NAME = 'ADC-RG ' / Name for ADC Board
HIERARCH ESO DET IRACE ADC2 DELAY = 7 / ADC Delay Adjustment
HIERARCH ESO DET IRACE ADC2 ENABLE = 1 / Enable ADC Board (0/1)
HIERARCH ESO DET IRACE ADC2 FILTER1 = 0 / ADC Filter1 Adjustment
HIERARCH ESO DET IRACE ADC2 FILTER2 = 0 / ADC Filter2 Adjustment
HIERARCH ESO DET IRACE ADC2 HEADER = 1 / Header of ADC Board
HIERARCH ESO DET IRACE ADC2 NAME = 'ADC-RG ' / Name for ADC Board
HIERARCH ESO DET IRACE SEQCONT = F / Sequencer Continuous Mode
HIERARCH ESO DET MINDIT= 899.8235 / Minimum DIT
HIERARCH ESO DET MODE NAME = ' ' / DCS Detector Mode
HIERARCH ESO DET NCORRS= 4 / Read-Out Mode
HIERARCH ESO DET NCORRS NAME = 'NonDest ' / Read-Out Mode Name
HIERARCH ESO DET NDIT = 1 / # of Sub-Integrations
HIERARCH ESO DET NDITSKIP = 0 / DITs skipped at 1st.INT
HIERARCH ESO DET NDSAMPLES = 1354 / # of Non-Dest. Samples
HIERARCH ESO DET NDSKIP= 1 / Samples skipped per DIT
HIERARCH ESO DET RSPEED= 6 / Read-Speed Factor
HIERARCH ESO DET RSPEEDADD = 0 / Read-Speed Add
HIERARCH ESO DET SATLEVEL = 42000 / Saturation Level
HIERARCH ESO DET VOLT1 CLKHI1 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI10 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI11 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI12 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI13 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI14 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI15 = 0. / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI16 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI2 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI3 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI4 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI5 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI6 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI7 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI8 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI9 = 0. / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHINM1= 'clk1Hi FSYNCB' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM10 = 'clk10Hi MODECTRL1' / Name of High-Cloc
HIERARCH ESO DET VOLT1 CLKHINM11 = 'clk11Hi MODECTRL2' / Name of High-Cloc
HIERARCH ESO DET VOLT1 CLKHINM12 = 'clock12Hi HORIWMEN' / Name of High-Clo
HIERARCH ESO DET VOLT1 CLKHINM13 = 'clock13Hi VERTWMEN' / Name of High-Clo
HIERARCH ESO DET VOLT1 CLKHINM14 = 'clock14Hi CSB' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM15 = 'clock15Hi DATACLK' / Name of High-Cloc
HIERARCH ESO DET VOLT1 CLKHINM16 = 'clock16Hi DATAIN' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM2= 'clk2Hi VCLK' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM3= 'clk3Hi LSYNCB' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM4= 'clk4Hi HCLK' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM5= 'clk5Hi READEN' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM6= 'clk6Hi RESETEN' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM7= 'clk7Hi MAINRESETB' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM8= 'clk8Hi BUFDISABLE' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM9= 'clk9Hi FASTENPAD' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHIT1 = 3.3105 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT10= 3.3154 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT11= 3.3252 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT12= 3.3252 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT13= 3.3105 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT14= 3.3057 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT15= 0.0488 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT16= 3.3154 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT2 = 3.3105 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT3 = 3.3154 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT4 = 3.3154 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT5 = 3.3105 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT6 = 3.3008 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT7 = 3.3008 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT8 = 3.3154 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT9 = 0.0488 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKLO1 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO10 = 3.3 / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO11 = 3.3 / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO12 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO13 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO14 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO15 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO16 = 3.3 / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO2 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO3 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO4 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO5 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO6 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO7 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO8 = 3.3 / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO9 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM1= 'clk1Lo FSYNCB' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM10 = 'clk10Lo MODECTRL1' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM11 = 'clk11Lo MODECTRL2' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM12 = 'clock12Lo HORIWMEN' / Name of Low-Cloc
HIERARCH ESO DET VOLT1 CLKLONM13 = 'clock13Lo VERTWMEN' / Name of Low-Cloc
HIERARCH ESO DET VOLT1 CLKLONM14 = 'clock14Lo CSB' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM15 = 'clock15Lo DATACLK' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM16 = 'clock16Lo DATAIN' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM2= 'clk2Lo VCLK' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM3= 'clk3Lo LSYNCB' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM4= 'clk4Lo HCLK' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM5= 'clk5Lo READEN' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM6= 'clk6Lo RESETEN' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM7= 'clk7Lo MAINRESETB' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM8= 'clk8Lo BUFDISABLE' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM9= 'clk9Lo FASTENPAD' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT1 = 0.0537 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT10= 3.3301 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT11= 3.3301 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT12= 0.0488 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT13= 0.0488 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT14= 0.0537 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT15= 0.0488 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT16= 3.3252 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT2 = 0.0488 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT3 = 0.0439 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT4 = 0.0488 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT5 = 0.0586 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT6 = 0.0391 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT7 = 0.0439 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT8 = 3.3154 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT9 = 0.0488 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 DC1 = 3.3 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC10 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC11 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC12 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC13 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC14 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC15 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC2 = 3.3 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC3 = 3.3 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC4 = 1.5 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC5 = 0.5 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC6 = 2.3 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC7 = 3.5 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC8 = 3. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC9 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DCNM1 = 'DC1 VDD ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM10 = 'DC10 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM11 = 'DC11 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM12 = 'DC12 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM13 = 'DC13 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM14 = 'DC14 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM15 = 'DC15 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM2 = 'DC2 VDDA' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM3 = 'DC3 VBIASPOWER' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM4 = 'DC4 DSUB' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM5 = 'DC5 VRESET' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM6 = 'DC6 BIASGATE' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM7 = 'DC7 EXTREF' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM8 = 'DC8 VLOAD' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM9 = 'DC9 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCTA1 = 3.2959 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA10 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA11 = 0.0098 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA12 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA13 = 0.0098 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA14 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA15 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA2 = 3.2959 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA3 = 3.291 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA4 = 1.5039 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA5 = 0.5029 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA6 = 2.2998 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA7 = 3.4961 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA8 = 2.998 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA9 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTB1 = 3.2861 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB10 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB11 = 0.0098 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB12 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB13 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB14 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB15 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB2 = 3.2861 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB3 = 3.2812 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB4 = 1.499 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB5 = 0.498 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB6 = 2.251 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB7 = 3.4717 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB8 = 2.9932 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB9 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET WIN NX= 2048 / # of Pixels in X
HIERARCH ESO DET WIN NY= 1100 / # of Pixels in Y
HIERARCH ESO DET WIN STARTX = 1 / Lower left X ref
HIERARCH ESO DET WIN STARTY = 1 / Lower left Y ref
HIERARCH ESO DET WIN TYPE = 0 / Win-Type: 0=SW/1=HW
HIERARCH ESO PRO CATG = 'SCI_SLIT_FLUX_MERGE1D_NIR' / Category of pipeline prod
HIERARCH ESO PRO DATANCOM = 1
HIERARCH ESO PRO B RELOFF RA = -3.830224
HIERARCH ESO PRO B RELOFF DEC = 3.213936
HIERARCH ESO PRO B CUMOFF RA = -1.915112
HIERARCH ESO PRO B CUMOFF DEC = 1.606968
HIERARCH ESO PRO RECT BIN LAMBDA = 0.06
HIERARCH ESO PRO RECT BIN SPACE= 0.21
HIERARCH ESO PRO RECT LAMBDA MIN = 994.02
HIERARCH ESO PRO RECT LAMBDA MAX = 2478.96
HIERARCH ESO PRO RECT SPACE MIN= -10.3400001526
HIERARCH ESO PRO RECT SPACE MAX= 5.40999984741
HIERARCH ESO PRO EXTRACT SLIT MIN = 0.
HIERARCH ESO PRO EXTRACT SLIT MAX = 0.
HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO
HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type
HIERARCH ESO PRO TECH = 'ECHELLE,SLIT,NODDING' / Observation technique
HIERARCH ESO PRO SCIENCE = T / Scientific product if T
HIERARCH ESO PRO REC1 ID = 'xsh_scired_slit_nod' / Pipeline recipe (unique
HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier
HIERARCH ESO PRO REC1 PIPE ID = 'xsh/1.3.7' / Pipeline (unique) identifier
HIERARCH ESO PRO REC1 RAW1 NAME= 'XSHOO.2010-04-07T04_13_50.797.fits' / File na
HIERARCH ESO PRO REC1 RAW1 CATG= 'OBJECT_SLIT_NOD_NIR' / Category of raw frame
HIERARCH ESO PRO REC1 RAW2 NAME= 'XSHOO.2010-04-07T04_31_43.138.fits' / File na
HIERARCH ESO PRO REC1 RAW2 CATG= 'OBJECT_SLIT_NOD_NIR' / Category of raw frame
HIERARCH ESO PRO REC1 RAW3 NAME= 'XSHOO.2010-04-07T04_49_28.828.fits' / File na
HIERARCH ESO PRO REC1 RAW3 CATG= 'OBJECT_SLIT_NOD_NIR' / Category of raw frame
HIERARCH ESO PRO REC1 RAW4 NAME= 'XSHOO.2010-04-07T05_07_21.168.fits' / File na
HIERARCH ESO PRO REC1 RAW4 CATG= 'OBJECT_SLIT_NOD_NIR' / Category of raw frame
HIERARCH ESO PRO REC1 CAL1 NAME= 'SPECTRAL_FORMAT_TAB_NIR.fits' / File name of
HIERARCH ESO PRO REC1 CAL1 CATG= 'SPECTRAL_FORMAT_TAB_NIR' / Category of calibr
HIERARCH ESO PRO REC1 CAL1 DATAMD5 = '062c1ee8138a40cbb1cb5fcd108f47c1' / MD
HIERARCH ESO PRO REC1 CAL2 NAME= 'PROD_MASTER_BP_MAP_NIR.fits' / File name of c
HIERARCH ESO PRO REC1 CAL2 CATG= 'MASTER_BP_MAP_NIR' / Category of calibration
HIERARCH ESO PRO REC1 CAL2 DATAMD5 = 'e9fa9f5f2908e15e9f0fbed0c9e4248a' / MD
HIERARCH ESO PRO REC1 CAL3 NAME= 'PROD_MASTER_DARK_NIR.fits' / File name of cal
HIERARCH ESO PRO REC1 CAL3 CATG= 'MASTER_DARK_NIR' / Category of calibration fr
HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '6e8f90b9cbdecd997d8b38da372ef0b3' / MD
HIERARCH ESO PRO REC1 CAL4 NAME= 'PROD_ORDER_TAB_EDGES_SLIT_NIR.fits' / File na
HIERARCH ESO PRO REC1 CAL4 CATG= 'ORDER_TAB_EDGES_SLIT_NIR' / Category of calib
HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '654db6a7534d8963c8ffa7b49f14a7c4' / MD
HIERARCH ESO PRO REC1 CAL5 NAME= 'PROD_MASTER_FLAT_SLIT_NIR.fits' / File name o
HIERARCH ESO PRO REC1 CAL5 CATG= 'MASTER_FLAT_SLIT_NIR' / Category of calibrati
HIERARCH ESO PRO REC1 CAL5 DATAMD5 = '139c9772c57fb39942bed4d8d92ebb93' / MD
HIERARCH ESO PRO REC1 CAL6 NAME= 'PROD_WAVE_TAB_AFC_NIR.fits' / File name of ca
HIERARCH ESO PRO REC1 CAL6 CATG= 'WAVE_TAB_2D_NIR' / Category of calibration fr
HIERARCH ESO PRO REC1 CAL6 DATAMD5 = '90289e1da48d6850e6a0c5a0bc5b1fc5' / MD
HIERARCH ESO PRO REC1 CAL7 NAME= 'PROD_DISP_TAB_AFC_NIR.fits' / File name of ca
HIERARCH ESO PRO REC1 CAL7 CATG= 'DISP_TAB_NIR' / Category of calibration frame
HIERARCH ESO PRO REC1 CAL7 DATAMD5 = 'eb0925da20dd96c3c3d3437c382ce870' / MD
HIERARCH ESO PRO REC1 CAL8 NAME= 'PROD_RESPONSE_MERGE1D_SLIT_NIR.fits' / File n
HIERARCH ESO PRO REC1 CAL8 CATG= 'RESPONSE_MERGE1D_SLIT_NIR' / Category of cali
HIERARCH ESO PRO REC1 CAL8 DATAMD5 = '1d8d5067e3ef5c35fd3c3001656e13ba' / MD
HIERARCH ESO PRO REC1 CAL9 NAME= 'xsh_paranal_extinct_nir.fits' / File name of
HIERARCH ESO PRO REC1 CAL9 CATG= 'ATMOS_EXT_NIR' / Category of calibration fram
HIERARCH ESO PRO REC1 CAL9 DATAMD5 = '6aea4595776baaa7efc244012254dd9c' / MD
HIERARCH ESO PRO REC1 PARAM1 NAME = 'keep-temp' / If 'no', temporary files
HIERARCH ESO PRO REC1 PARAM1 VALUE = 'no ' / Default: 'no'
HIERARCH ESO PRO REC1 PARAM2 NAME = 'debug-level' / Additional xshooter deb
HIERARCH ESO PRO REC1 PARAM2 VALUE = 'none ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM3 NAME = 'test ' / Can be any string, usage d
HIERARCH ESO PRO REC1 PARAM3 VALUE = 'none ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM4 NAME = 'time-stamp' / Add timestamp to product
HIERARCH ESO PRO REC1 PARAM4 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM5 NAME = 'pre-overscan-corr' / pre-overscan corr
HIERARCH ESO PRO REC1 PARAM5 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM6 NAME = 'background-nb-y' / number of points of
HIERARCH ESO PRO REC1 PARAM6 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM7 NAME = 'background-radius-x' / half size of th
HIERARCH ESO PRO REC1 PARAM7 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM8 NAME = 'background-radius-y' / half size of th
HIERARCH ESO PRO REC1 PARAM8 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM9 NAME = 'background-min-grid-frac' / Minimum fr
HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.3333 ' / Default: 0.3333
HIERARCH ESO PRO REC1 PARAM10 NAME = 'background-grid-frac' / maximum fracti
HIERARCH ESO PRO REC1 PARAM10 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM11 NAME = 'background-method' / method adopted fo
HIERARCH ESO PRO REC1 PARAM11 VALUE = 'poly ' / Default: 'poly'
HIERARCH ESO PRO REC1 PARAM12 NAME = 'background-smooth-x' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM12 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM13 NAME = 'background-smooth-y' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM13 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM14 NAME = 'background-debug' / Generate a table c
HIERARCH ESO PRO REC1 PARAM14 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM15 NAME = 'removecrhsingle-frac-max' / Max fracti
HIERARCH ESO PRO REC1 PARAM15 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM16 NAME = 'removecrhsingle-sigmalim' / Poisson fl
HIERARCH ESO PRO REC1 PARAM16 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM17 NAME = 'removecrhsingle-flim' / Minimum contra
HIERARCH ESO PRO REC1 PARAM17 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM18 NAME = 'removecrhsingle-niter' / Max number of
HIERARCH ESO PRO REC1 PARAM18 VALUE = '4 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM19 NAME = 'rectify-kernel' / Name of the Interpol
HIERARCH ESO PRO REC1 PARAM19 VALUE = 'default ' / Default: 'default'
HIERARCH ESO PRO REC1 PARAM20 NAME = 'rectify-radius' / Rectify Interpolatio
HIERARCH ESO PRO REC1 PARAM20 VALUE = '1 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM21 NAME = 'rectify-bin-lambda' / Wavelength step
HIERARCH ESO PRO REC1 PARAM21 VALUE = '0.06 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM22 NAME = 'rectify-bin-slit' / Spatial step along
HIERARCH ESO PRO REC1 PARAM22 VALUE = '0.21 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM23 NAME = 'rectify-full-slit' / Use full slit if
HIERARCH ESO PRO REC1 PARAM23 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM24 NAME = 'rectify-conserve-flux' / Use flux cons
HIERARCH ESO PRO REC1 PARAM24 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM25 NAME = 'rectify-fast' / Fast if TRUE (Rect[B-A
HIERARCH ESO PRO REC1 PARAM25 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM26 NAME = 'localize-method' / Localization method
HIERARCH ESO PRO REC1 PARAM26 VALUE = 'GAUSSIAN' / Default: 'GAUSSIAN'
HIERARCH ESO PRO REC1 PARAM27 NAME = 'localize-chunk-nb' / Number of chunks
HIERARCH ESO PRO REC1 PARAM27 VALUE = '10 ' / Default: 10
HIERARCH ESO PRO REC1 PARAM28 NAME = 'localize-thresh' / Threshold relative
HIERARCH ESO PRO REC1 PARAM28 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM29 NAME = 'localize-deg-lambda' / Degree in lambd
HIERARCH ESO PRO REC1 PARAM29 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM30 NAME = 'localize-slit-position' / Object posit
HIERARCH ESO PRO REC1 PARAM30 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM31 NAME = 'localize-slit-hheight' / Object half h
HIERARCH ESO PRO REC1 PARAM31 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM32 NAME = 'localize-kappa' / Kappa value for sigm
HIERARCH ESO PRO REC1 PARAM32 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM33 NAME = 'localize-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM33 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM34 NAME = 'localize-use-skymask' / TRUE if we wan
HIERARCH ESO PRO REC1 PARAM34 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM35 NAME = 'localize-nod-throw' / Step (arcsec) be
HIERARCH ESO PRO REC1 PARAM35 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM36 NAME = 'extract-method' / Method used for extr
HIERARCH ESO PRO REC1 PARAM36 VALUE = 'NOD ' / Default: 'NOD'
HIERARCH ESO PRO REC1 PARAM37 NAME = 'mergeord-method' / Method for combinin
HIERARCH ESO PRO REC1 PARAM37 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM38 NAME = 'combinenod-min' / minimum NS size of r
HIERARCH ESO PRO REC1 PARAM38 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM39 NAME = 'combinenod-clip' / TRUE if do sigma cl
HIERARCH ESO PRO REC1 PARAM39 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM40 NAME = 'combinenod-clip-sigma' / Kappa value i
HIERARCH ESO PRO REC1 PARAM40 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM41 NAME = 'combinenod-clip-niter' / Number of ite
HIERARCH ESO PRO REC1 PARAM41 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM42 NAME = 'combinenod-clip-diff' / Minimal change
HIERARCH ESO PRO REC1 PARAM42 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM43 NAME = 'combinenod-throwlist' / Name of ascii
HIERARCH ESO PRO REC1 PARAM43 VALUE = 'throwlist.asc' / Default: 'throwlist.a
HIERARCH ESO PRO REC1 PARAM44 NAME = 'combinenod-method' / Combination metho
HIERARCH ESO PRO REC1 PARAM44 VALUE = 'MEAN ' / Default: 'MEAN'
HIERARCH ESO PRO REC1 PARAM45 NAME = 'max-slit' / Lower Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM45 VALUE = '5.7 ' / Default: 5.7
HIERARCH ESO PRO REC1 PARAM46 NAME = 'min-slit' / Upper Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM46 VALUE = '-5.3 ' / Default: -5.3
HIERARCH ESO PRO REC1 PARAM47 NAME = 'crh-clip-kappa' / Kappa value in sigma
HIERARCH ESO PRO REC1 PARAM47 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM48 NAME = 'crh-clip-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM48 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM49 NAME = 'crh-clip-frac' / Minimal ratio of poin
HIERARCH ESO PRO REC1 PARAM49 VALUE = '0.7 ' / Default: 0.7
HIERARCH ESO PRO REC1 PARAM50 NAME = 'compute-map' / if TRUE recompute (wave
HIERARCH ESO PRO REC1 PARAM50 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM51 NAME = 'do-flatfield' / TRUE if we do the flat
HIERARCH ESO PRO REC1 PARAM51 VALUE = 'true ' / Default: true
HIERARCH ESO ADA ABSROT END = -48.97233 / Abs rot angle at exp end (deg)
HIERARCH ESO ADA ABSROT PPOS = 'NEG ' / sign of probe position
HIERARCH ESO ADA ABSROT START = -51.47335 / Abs rot angle at exp start (deg)
HIERARCH ESO ADA GUID DEC = -39.02293 / -39:01:22.5 Guide star DEC J2000
HIERARCH ESO ADA GUID RA = 242.207099 / 16:08:49.7 Guide star RA J2000
HIERARCH ESO ADA GUID STATUS = 'ON ' / Status of autoguider
HIERARCH ESO ADA POSANG= -130. / Position angle at start
HIERARCH ESO OCS DET3 IMGNAME = 'XSHOOTER_SLT_OBJ_NIR_' / Data File Name.
HIERARCH ESO SEQ ARM = 'NIR ' / Instrument Arm
HIERARCH ESO SEQ CUMOFF DEC = -1.606968 / Cumulative DEC offset
HIERARCH ESO SEQ CUMOFF RA = 1.915112 / Cumulative RA offset
HIERARCH ESO SEQ CUMOFF X = 0. / Cumulative offset X (along the sli
HIERARCH ESO SEQ CUMOFF Y = 2.5 / Cumulative offset Y (along the sli
HIERARCH ESO SEQ JITTER WIDTH = 0. / Width of the Jitter box (arcsec)
HIERARCH ESO SEQ NOD THROW = 5. / Nodding throw length in arcsec
HIERARCH ESO SEQ RELOFF DEC = -1.606968 / List of DEC offsets
HIERARCH ESO SEQ RELOFF RA = 1.915112 / List of RA offsets
HIERARCH ESO QC NPIXSAT= 4863. / Number of saturated pixels
HIERARCH ESO QC FPIXSAT= 0.00225740864528 / Fraction of saturated pixels
HIERARCH ESO QC CRRATE = 1.39960689767 / Number of detected cosmic ray hits p
HIERARCH ESO QC NCRH AVG = 8792 / Number of detected cosmic ray hits
HIERARCH ESO QC VRAD BARYCOR = 22.4222428042 / Barycentric radial velocity co
HIERARCH ESO QC VRAD HELICOR = 22.412006694 / Heliocentric radial velocity c
.
HISTORY ESO-DESCRIPTORS START ................
HISTORY 'LHCUTS','R*4',1,4,'5E14.7'
HISTORY 0.0000000E+00 0.0000000E+00 1.1754944E-38 6.3746404E-15
HISTORY
HISTORY 'WAT1_001','C*1',1,68,'68A1'
HISTORY wtype=linear label=Wavelength units=angstroms units_display=angstrom
HISTORY
HISTORY ESO-DESCRIPTORS END ................
.
END
END